Table number with a QR code
An 85 mm wedge with the large embossed number and the code below.
1Content
Also accepts tel:, mailto: or any address. The shorter, the better it prints.
Always use the guest network: anyone who scans the code can read the password.
Or start from a template
2Code design
On the 3D object the logo becomes a single-color silhouette.
3Turn your QR into a 3D object
Up to 28 characters. A short text multiplies scans.
Code preview
Everything is generated in your browser. No data is sent to a server.
3D object
- Modules
- —
- Per module
- —
- Size
- —
- Triangles
- —
Model specs
| Format | Angled stand |
|---|---|
| Recommended size | 85 mm |
| Number | 1 to 3 characters |
| Pieces | 3 (base, code, number+text) |
| Supports | Not needed |
| Approximate time | 2.5 h |
If your ordering system accepts the table number in the link, each piece will carry its own code and the order will arrive already assigned to the table.
Full set
Generate one piece per table, changing the number and the link's parameter. It takes about 20 seconds per table.
Common questions
Can I use letters?
Yes, up to three characters: '12', 'A1' or 'B'.
How much does a set of 30 cost?
Roughly $15-25 in filament and about 40-60 hours of printer time, though filament prices vary by country.